NCCCO Rigger Level II Prep
In addition to knowing and demonstrating Rigger Level I knowledge and skills, a Certified Rigger Level II can select rigging components and procedures based on rigging capacity. A Level II Rigger can perform the following rigging tasks unsupervised:
- Estimate load weight and center of gravity
- Identify lift points
- Determine and select rigging based on loading
- Perform pre-use inspection of rigging and lift points
- Identify and attach rigging with knowledge of hitch configurations and load angle factors, rigging capacities, and load integrity
- Understand load dynamics and associated hazards
Upcoming Training Center Courses
Written Exam Outline
The CCO Certified Rigger Level I Written Examination tests the following knowledge areas relating to rigging:
Scope of the Rigging Activity(Approximately 15% of the Test)
Planning the Rigging Activity
(Approximately 15% of the Test)
Selection of Rigging Components
(Approximately 34% of the Test)
Technical Knowledge
(Approximately 13% of the Test)
Inspection
(Approximately 10% of the Test)
Execution of Rigging Activity
(Approximately 13% of the Test)
PPE Information
The following PPE is required for all hands-on sessions at ITI Training Centers:
- OSHA-approved hard hat*
- Eye protection*
- Long pants with no holes or tears
- Low-heeled work boots or work shoes
- Full-fingered work gloves*
- OSHA-approved safety vest*
*ITI Training Centers will make these PPE items available for all enrolled students. Students are responsible for their own appropriate garments and footwear.
Find a Course Date That's Right for You
Sun | Mon | Tues | Wed | Thu | Fri | Sat |
---|
Request a Quote
Host a NCCCO Rigger Level II Prep Course at your location
Daily Training Schedule
Day 1-2
Classroom only sessions that include; training, sample exams, and standards review
Day 3
Candidates perform the hands-on practical and written exams.
Related Courses
Still have questions?
Submit a question to an ITI Training Solutions Advisor, or explore the ITI Knowledge Base!